Stables for horses
I was asked by a friend if I could help to build a set of stables for their horses. 2 days later after a lot of laughs and rain, the horses moved in.
Similar Posts
Bedroom – Surf Shack Bed
This project was a follow up from the princess carriage bed. A beach/surf theme was requested. I started by building a deck on the sand colored carpet, followed by the frame of the shack, with siding and slanted window for a bit of fun / character. A thatch open roof was added. I made some…
Wardrobe build and install
I was asked to assemble a wardrobe in a bedroom. This was a nice little project that fitted in well with the room decor. I am grateful that the customer picked the colours of the unit and made sure the colour scheme worked and made my finished job look great.
Internal Doors
I was asked to replace 4 internal doors. These are the solid core doors with an oak veneered / edged. As they are heavy I replaced the old to hinges with 3 ball bearing units for each door. 2 of the doors were fitted with the simple door catch and handle. The kitchen door was…
New outhouse door & frame
A customer asked if i could remove / replace an old rotten door and frame on a brick storage outhouse. It needed to be secure and sturdy as they wanted to store garden tools and a lawn mower in there. This was not a standard size, so I made a bespoke treated wood frame and…
Front room – Painting, Flooring, Wardrobe storage & TV mounting
I was asked to finish a new room that had been built from a converted garage that was no longer used. After refinishing the plastered walls and ceiling, I fitted new wooden laminate floor boards, skirting boards and woodwork to the room. I then painted 2 coats of white on the ceiling and a washable…
Understairs toilet update
I was asked to update the toilet room that was under the stairs. I collected and fitted some oak laminate flooring that was design for occasional wet areas. A new door frame was fitted, along with a new door to match the rest of the rooms downstairs. I then turned my attention to the slate…